https://pastein.ru/t/jPa
Загрузка данных
user@debian:~$ sudo smartctl -x /dev/sda
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.12.73+deb13-amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA-TR200
Serial Number: 28QB71PAK46S
LU WWN Device Id: 5 00080d c00b44c06
Firmware Version: SBFA12.4
User Capacity: 240,056,327,680 bytes [240 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-4 (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Sep 3 18:54:29 2025 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 30) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
9 Power_On_Hours -O--C- 100 100 000 - 11728
12 Power_Cycle_Count -O--C- 100 100 000 - 2290
167 Unknown_Attribute -O---K 100 100 000 - 0
168 Unknown_Attribute -O--C- 100 100 000 - 0
169 Unknown_Attribute PO---- 100 100 010 - 0
173 Unknown_Attribute -O--C- 143 143 000 - 0
192 Power-Off_Retract_Count -O--C- 100 100 000 - 247
194 Temperature_Celsius PO---K 072 054 020 - 28 (Min/Max 21/46)
241 Total_LBAs_Written -O--CK 100 100 000 - 427042
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 2290 --- Lifetime Power-On Resets
0x01 0x010 4 11728 --- Power-on Hours
0x01 0x018 6 27986666713 --- Logical Sectors Written
0x01 0x028 6 56226190453 --- Logical Sectors Read
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 28 --- Current Temperature
0x05 0x020 1 46 --- Highest Temperature
0x05 0x028 1 21 --- Lowest Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 47 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 16 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 6 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
| grep -iE 'ata|I/O errot|reset|failed|uncorrectable'
[ 0.000000] BIOS-e820: [mem 0x00000000aaf9f000-0x00000000aaffefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000a6e4d017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a6e4d018-0x00000000a6e5d057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000a6e5d058-0x00000000aabeefff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000aabef000-0x00000000aaeeefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000aaeef000-0x00000000aaf9efff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000aaf9f000-0x00000000aaffefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000aafff000-0x00000000aaffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000014fdfffff] usable
[ 0.018361] NODE_DATA(0) allocated [mem 0x14fdd5680-0x14fdfffff]
[ 0.137192] MMIO Stale Data: Unknown: No mitigations
[ 0.186698] Memory: 3774708K/4105784K available (16384K kernel code, 2497K rwdata, 11800K rodata, 4164K init, 4920K bss, 325840K reserved, 0K cma-reserved)
[ 0.234178] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.252369] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.308264] Write protecting the kernel read-only data: 28672k
[ 1.308708] Freeing unused kernel image (rodata/data gap) memory: 488K
[ 2.053601] libata version 3.00 loaded.
[ 2.090734] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode
[ 2.116111] ata1: SATA max UDMA/133 abar m2048@0xc0608000 port 0xc0608100 irq 25 lpm-pol 3
[ 2.116115] ata2: DUMMY
[ 2.116117] ata3: DUMMY
[ 2.116119] ata4: SATA max UDMA/133 abar m2048@0xc0608000 port 0xc0608280 irq 25 lpm-pol 0
[ 2.116123] ata5: SATA max UDMA/133 abar m2048@0xc0608000 port 0xc0608300 irq 25 lpm-pol 0
[ 2.116124] ata6: DUMMY
[ 2.428601] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.428757] ata1.00: HPA detected: current 468860015, native 468862128
[ 2.428770] ata1.00: ATA-11: TOSHIBA-TR200, SBFA12.4, max UDMA/133
[ 2.428808] ata1.00: 468860015 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.429180] ata1.00: Features: Dev-Sleep
[ 2.429679] ata1.00: configured for UDMA/133
[ 2.440338] scsi 0:0:0:0: Direct-Access ATA TOSHIBA-TR200 12.4 PQ: 0 ANSI: 5
[ 2.756253] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.068378] ata5: SATA link down (SStatus 0 SControl 300)
[ 11.612204] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because no trigger condition checks were met.
[ 14.930950] cfg80211: Loading compiled-in X.509 certificates for regulatory database
