---

bitboxuser@pisunbig:~/Desktop/tr4mpass$ idevice_id -l
bitboxuser@pisunbig:~/Desktop/tr4mpass$ sudo ./start.sh
========================================
  tr4mpass v0.2.0
  Activation lock bypass research tool
========================================

[+] Detected OS: Linux (Ubuntu 26.04 LTS)
[+] All dependencies are already installed.
[+] Binary already built: /home/bitboxuser/Desktop/tr4mpass/tr4mpass

----------------------------------------
[*] Connect your iOS device via USB cable.

[*] Waiting for device... 12s / 60s[+] Device detected in normal mode!
[*] Querying device information...

========================================
  Device Information
========================================
  Model:       iPhone14,8
  Chip:        A15 (CPID: 0x8110)
  iOS:         26.1
  Serial:      T7D93PG4P7
  IMEI:        358075742064900
  Mode:        normal
  Bypass:      Path B (identity, A12+)
  Status:      SUPPORTED
========================================

[!] Path B (A12+ bypass) requires DFU mode, but device is in normal mode.


[*] DFU entry instructions (Face ID / no Home button device):

  1. Connect device to computer via USB
  2. Quick-press Volume Up, then Volume Down
  3. Hold Side button until screen goes black
  4. Hold Side + Volume Down for 5 seconds
  5. Release Side, keep holding Volume Down for 10 seconds
  6. Screen must be BLACK (not Apple logo)

  If you see the Apple logo, you entered recovery mode.
  Start over from step 2.

[*] Waiting for DFU mode...
[*] Waiting for DFU... 80s / 120s[+] Device detected in DFU mode!
[+] Device is supported. Ready to proceed.

Press Enter to start bypass...

[*] Starting tr4mpass...

========================================
  tr4mpass v0.2.0
  Activation lock bypass research tool
========================================

[INFO] DFU device found (bus 1, addr 14)
[INFO] Device found in DFU mode
[WARN] CPID field not found in serial string
[WARN] ECID field not found in serial string
[ERROR] DFU serial indicates device is NOT in SecureROM DFU mode.
[INFO] Expected format: 'CPID:XXXX CPRV:XX BDID:XX ECID:XXXX ...'
[INFO] Re-enter DFU using the correct button sequence:
[INFO]   Home button:  Power+Home 10s, release Power, hold Home 5s
[INFO]   Face ID:      Vol-Up, Vol-Down, hold Side to black screen,
[INFO]                 Side+Vol-Down 5s, release Side, hold Vol-Down 10s
[INFO] Screen must stay completely BLACK (no Apple logo).
[WARN] CPID not available, chip lookup skipped

--- Device Information ---
  UDID:             
  Product Type:     
  Chip ID:          
  iOS Version:      
  Activation State: 
  Serial:           Apple Mobile Device (DFU Mode)
  IMEI:             (none / WiFi-only)
  MEID:             (none)
  Hardware Model:   
  Device Name:      
  CPID:             0x0000
  ECID:             0x0
  Chip Name:        (unknown)
  checkm8 vuln:     NO
  Cellular:         NO (WiFi-only)
  DFU Mode:         YES
-------------------------

[INFO] [bypass] Registered module: path_a_checkm8
[INFO] [bypass] Registered module: path_b_a12plus
[INFO] [bypass] 2 registered module(s):
[INFO]   [0] path_a_checkm8 -- A5-A11 bypass via checkm8 BootROM exploit + jailbreak + activation
[INFO]   [1] path_b_a12plus -- A12+ bypass via identity manipulation + session activation
[INFO] path_a: device not checkm8-vulnerable (A12+ or unknown)
[INFO] [path_b] A12+ device in DFU mode detected -- Path B compatible
[INFO] [bypass] Selected module: path_b_a12plus
[INFO] Auto-selected module: path_b_a12plus
[INFO] Executing module: path_b_a12plus
[INFO] [bypass] Executing module: path_b_a12plus
[INFO] [path_b] === Starting A12+ bypass (Path B) ===
[INFO] [path_b] Device:  (CPID 0x0000, ECID 0x0)
[INFO] [path_b] Step 1/10: Rebooting device from DFU to recovery mode...
[INFO] [path_b] DFU abort sent, waiting for recovery mode...
[INFO] [path_b] Recovery mode detected (58s)
[INFO] [path_b] Step 2/10: Manipulating device identity in recovery mode...
[ERROR] [path_b_id] No USB handle for DFU mode
[ERROR] [path_b] Identity manipulation failed

[-] Bypass failed (error -1).