https://pastein.ru/t/2oJ
Загрузка данных
est@test-B75:~$ sudo smartctl -t long /dev/sda
[sudo] password for test:
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.14.0-37-generic] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 4 minutes for test to complete.
Test will complete after Fri Jul 10 11:55:12 2026 MSK
Use smartctl -X to abort test.
test@test-B75:~$ sudo smartctl -x /dev/sda
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.14.0-37-generic] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: A400
Serial Number: 202210512G0178
LU WWN Device Id: 0 000000 000000000
Firmware Version: HPS2227I
User Capacity: 512 110 190 592 bytes [512 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Jul 10 11:55:22 2026 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 54) seconds.
Offline data collection
capabilities: (0x5d) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 4) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
9 Power_On_Hours -O--CK 100 100 050 - 259
12 Power_Cycle_Count -O--CK 100 100 050 - 215
160 Unknown_Attribute -O--CK 100 100 050 - 0
161 Unknown_Attribute -O--CK 100 100 050 - 100
163 Unknown_Attribute -O--CK 100 100 050 - 84
164 Unknown_Attribute -O--CK 100 100 050 - 10
165 Unknown_Attribute -O--CK 100 100 050 - 51
166 Unknown_Attribute -O--CK 100 100 050 - 5
167 Unknown_Attribute -O--CK 100 100 050 - 20
168 Unknown_Attribute -O--CK 100 100 050 - 0
169 Unknown_Attribute -O--CK 100 100 050 - 100
175 Program_Fail_Count_Chip -O--CK 100 100 050 - 301989888
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 64662
177 Wear_Leveling_Count -O--CK 100 100 050 - 34457353
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 196608
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
192 Power-Off_Retract_Count -O--CK 100 100 050 - 94
194 Temperature_Celsius -O--CK 100 100 050 - 41
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 349487
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
197 Current_Pending_Sector -O--CK 100 100 050 - 0
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0
232 Available_Reservd_Space -O--CK 100 100 050 - 100
241 Total_LBAs_Written -O--CK 100 100 050 - 100810
242 Total_LBAs_Read -O--CK 100 100 050 - 95819
245 Unknown_Attribute -O--CK 100 100 050 - 185081
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 1 Comprehensive SMART error log
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0 GPL,SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 2407 (device log contains only the most recent 4 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2407 [2] occurred at disk power-on lifetime: 258 hours (10 days + 18 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 40 00 90 00 12 23 00 d0 e0 00 00 at LBA = 0x122300d0e0 = 77896667360
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 90 00 12 23 00 d0 e0 40 08 00:43:55.400 READ FPDMA QUEUED
61 00 80 00 88 00 1d cc 00 ee 48 40 08 00:43:55.400 WRITE FPDMA QUEUED
ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:43:55.380 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:43:55.380 IDENTIFY DEVICE
ef 00 10 00 06 00 00 00 00 00 00 00 08 00:43:55.380 SET FEATURES [Enable SATA feature]
Error 2406 [1] occurred at disk power-on lifetime: 258 hours (10 days + 18 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 40 00 28 00 12 23 00 d0 e0 00 00 at LBA = 0x122300d0e0 = 77896667360
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 28 00 12 23 00 d0 e0 40 08 00:43:55.320 READ FPDMA QUEUED
61 00 80 00 20 00 1d cc 00 ee 48 40 08 00:43:55.320 WRITE FPDMA QUEUED
60 00 18 00 18 00 01 08 00 10 68 40 08 00:43:55.320 READ FPDMA QUEUED
60 00 08 00 08 00 01 08 00 10 00 40 08 00:43:55.320 READ FPDMA QUEUED
60 00 08 00 00 00 00 08 00 d0 00 40 08 00:43:55.320 READ FPDMA QUEUED
Error 2405 [0] occurred at disk power-on lifetime: 258 hours (10 days + 18 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 40 00 b8 00 12 23 00 d0 e8 00 00 at LBA = 0x122300d0e8 = 77896667368
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 18 00 b8 00 12 23 00 d0 e8 40 08 00:43:55.260 READ FPDMA QUEUED
60 00 08 00 a8 00 12 23 00 d0 e0 40 08 00:43:55.260 READ FPDMA QUEUED
60 00 d8 00 a0 00 12 23 00 d0 08 40 08 00:43:55.260 READ FPDMA QUEUED
61 00 80 00 90 00 1d cc 00 ee 48 40 08 00:43:55.260 WRITE FPDMA QUEUED
60 00 20 00 b0 00 01 16 00 4b 00 40 08 00:43:55.260 READ FPDMA QUEUED
Error 2404 [3] occurred at disk power-on lifetime: 258 hours (10 days + 18 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 40 00 00 00 1d 08 00 d4 00 00 00 at LBA = 0x1d0800d400 = 124688323584
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 00 00 1d 08 00 d4 00 40 08 00:43:55.170 WRITE FPDMA QUEUED
61 00 08 00 a0 00 13 21 00 16 c0 40 08 00:43:55.170 WRITE FPDMA QUEUED
60 00 08 00 78 00 13 21 00 16 c0 40 08 00:43:55.170 READ FPDMA QUEUED
60 00 b0 00 98 00 31 0a 00 90 58 40 08 00:43:55.170 READ FPDMA QUEUED
60 00 08 00 90 00 31 0a 00 90 50 40 08 00:43:55.170 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Offline Completed without error 00% 259 -
# 2 Offline Self-test routine in progress 10% 259 -
# 3 Offline Self-test routine in progress 10% 259 -
# 4 Offline Self-test routine in progress 10% 259 -
# 5 Offline Self-test routine in progress 10% 259 -
# 6 Offline Self-test routine in progress 10% 259 -
# 7 Offline Self-test routine in progress 10% 259 -
# 8 Offline Self-test routine in progress 10% 259 -
# 9 Offline Self-test routine in progress 10% 259 -
#10 Offline Self-test routine in progress 10% 259 -
#11 Offline Self-test routine in progress 10% 259 -
#12 Offline Self-test routine in progress 10% 259 -
#13 Offline Self-test routine in progress 10% 259 -
#14 Offline Self-test routine in progress 10% 259 -
#15 Offline Self-test routine in progress 10% 259 -
#16 Offline Self-test routine in progress 10% 259 -
#17 Offline Self-test routine in progress 10% 259 -
#18 Offline Self-test routine in progress 10% 259 -
#19 Offline Self-test routine in progress 10% 259 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 215 --- Lifetime Power-On Resets
0x01 0x010 4 259 --- Power-on Hours
0x01 0x018 6 6606684160 --- Logical Sectors Written
0x01 0x020 6 7659040 --- Number of Write Commands
0x01 0x028 6 6279593984 --- Logical Sectors Read
0x01 0x030 6 16011380 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 215 --- Lifetime Power-On Resets
0x01 0x010 4 259 --- Power-on Hours
0x01 0x018 6 6606684160 --- Logical Sectors Written
0x01 0x020 6 7659040 --- Number of Write Commands
0x01 0x028 6 6279593984 --- Logical Sectors Read
0x01 0x030 6 16011380 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 215 --- Lifetime Power-On Resets
0x01 0x010 4 259 --- Power-on Hours
0x01 0x018 6 6606684160 --- Logical Sectors Written
0x01 0x020 6 7659040 --- Number of Write Commands
0x01 0x028 6 6279593984 --- Logical Sectors Read
0x01 0x030 6 16011380 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 215 --- Lifetime Power-On Resets
0x01 0x010 4 259 --- Power-on Hours
0x01 0x018 6 6606684160 --- Logical Sectors Written
0x01 0x020 6 7659040 --- Number of Write Commands
0x01 0x028 6 6279593984 --- Logical Sectors Read
0x01 0x030 6 16011380 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 215 --- Lifetime Power-On Resets
0x01 0x010 4 259 --- Power-on Hours
0x01 0x018 6 6606684160 --- Logical Sectors Written
0x01 0x020 6 7659040 --- Number of Write Commands
0x01 0x028 6 6279593984 --- Logical Sectors Read
0x01 0x030 6 16011380 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 215 --- Lifetime Power-On Resets
0x01 0x010 4 259 --- Power-on Hours
0x01 0x018 6 6606684160 --- Logical Sectors Written
0x01 0x020 6 7659040 --- Number of Write Commands
0x01 0x028 6 6279593984 --- Logical Sectors Read
0x01 0x030 6 16011380 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 215 --- Lifetime Power-On Resets
0x01 0x010 4 259 --- Power-on Hours
0x01 0x018 6 6606684160 --- Logical Sectors Written
0x01 0x020 6 7659040 --- Number of Write Commands
0x01 0x028 6 6279593984 --- Logical Sectors Read
0x01 0x030 6 16011380 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 215 --- Lifetime Power-On Resets
0x01 0x010 4 259 --- Power-on Hours
0x01 0x018 6 6606684160 --- Logical Sectors Written
0x01 0x020 6 7659040 --- Number of Write Commands
0x01 0x028 6 6279593984 --- Logical Sectors Read
0x01 0x030 6 16011380 --- Number of Read Commands
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0009 4 439 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 29091 Device-to-host register FISes sent due to a COMRESET
0x000b 4 27748 CRC errors within host-to-device FIS
0x000d 4 2052 Non-CRC errors within host-to-device FIS
test@test-B75:~$ dmesg -T | grep -Ei 'ata|sata|error|reset|i/o|failed'
[Fri Jul 10 11:50:27 2026] BIOS-e820: [mem 0x00000000ce84d000-0x00000000ce85cfff] ACPI data
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x0000000020200000-0x000000003fffffff] usable
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x0000000040000000-0x00000000401fffff] reserved
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x0000000040200000-0x00000000c9f44fff] usable
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x00000000c9f45000-0x00000000c9f87fff] ACPI NVS
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x00000000c9f88000-0x00000000ca6f8017] usable
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x00000000ca6f8018-0x00000000ca706057] usable
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x00000000ca706058-0x00000000ca707017] usable
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x00000000ca707018-0x00000000ca717057] usable
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x00000000ca717058-0x00000000ce2c3fff] usable
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x00000000ce2c4000-0x00000000ce84cfff] reserved
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x00000000ce84d000-0x00000000ce85cfff] ACPI data
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x00000000ce85d000-0x00000000ced21fff] ACPI NVS
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x00000000ced22000-0x00000000ceffefff] reserved
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x00000000cefff000-0x00000000ceffffff] usable
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x00000000cf000000-0x00000000df9fffff] reserved
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[Fri Jul 10 11:50:27 2026] reserve setup_data: [mem 0x0000000100000000-0x000000021f5fffff] usable
[Fri Jul 10 11:50:27 2026] ACPI: SSDT 0x00000000CE85A738 00035B (v01 SataRe SataTabl 00001000 INTL 20091112)
[Fri Jul 10 11:50:27 2026] NODE_DATA(0) allocated [mem 0x21f5d2540-0x21f5fcfff]
[Fri Jul 10 11:50:27 2026] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
[Fri Jul 10 11:50:28 2026] APIC: Switch to symmetric I/O mode setup
[Fri Jul 10 11:50:28 2026] MMIO Stale Data: Unknown: No mitigations
[Fri Jul 10 11:50:28 2026] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[Fri Jul 10 11:50:28 2026] Memory: 7717848K/8081536K available (21475K kernel code, 4587K rwdata, 15072K rodata, 5140K init, 4412K bss, 343516K reserved, 0K cma-reserved)
[Fri Jul 10 11:50:28 2026] libata version 3.00 loaded.
[Fri Jul 10 11:50:28 2026] DMAR: Intel(R) Virtualization Technology for Directed I/O
[Fri Jul 10 11:50:28 2026] RAS: Correctable Errors collector initialized.
[Fri Jul 10 11:50:28 2026] Write protecting the kernel read-only data: 38912k
[Fri Jul 10 11:50:28 2026] Freeing unused kernel image (text/rodata gap) memory: 1052K
[Fri Jul 10 11:50:28 2026] Freeing unused kernel image (rodata/data gap) memory: 1312K
[Fri Jul 10 11:50:28 2026] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode
[Fri Jul 10 11:50:28 2026] ata1: DUMMY
[Fri Jul 10 11:50:28 2026] ata2: DUMMY
[Fri Jul 10 11:50:28 2026] ata3: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16200 irq 34 lpm-pol 4
[Fri Jul 10 11:50:28 2026] ata4: DUMMY
[Fri Jul 10 11:50:28 2026] ata5: DUMMY
[Fri Jul 10 11:50:28 2026] ata6: DUMMY
[Fri Jul 10 11:50:29 2026] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[Fri Jul 10 11:50:29 2026] ata3.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
[Fri Jul 10 11:50:29 2026] ata3.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
[Fri Jul 10 11:50:29 2026] ata3.00: ATA-9: A400, HPS2227I, max UDMA/133
[Fri Jul 10 11:50:29 2026] ata3.00: 1000215216 sectors, multi 8: LBA48 NCQ (depth 32), AA
[Fri Jul 10 11:50:29 2026] ata3.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
[Fri Jul 10 11:50:29 2026] ata3.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
[Fri Jul 10 11:50:29 2026] ata3.00: configured for UDMA/133
[Fri Jul 10 11:50:29 2026] scsi 2:0:0:0: Direct-Access ATA A400 227I PQ: 0 ANSI: 5
[Fri Jul 10 11:50:29 2026] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[Fri Jul 10 11:50:30 2026] EXT4-fs (sda2): mounted filesystem 7666c0a4-2664-4425-9010-f3e122707ea3 ro with ordered data mode. Quota mode: none.
[Fri Jul 10 11:50:31 2026] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[Fri Jul 10 11:51:52 2026] ata3.00: exception Emask 0x0 SAct 0x7f000807 SErr 0x0 action 0x6 frozen
[Fri Jul 10 11:51:52 2026] ata3.00: failed command: WRITE FPDMA QUEUED
[Fri Jul 10 11:51:52 2026] ata3.00: cmd 61/38:00:78:e8:e0/00:00:01:00:00/40 tag 0 ncq dma 28672 out
[Fri Jul 10 11:51:52 2026] ata3.00: status: { DRDY }
[Fri Jul 10 11:51:52 2026] ata3.00: failed command: WRITE FPDMA QUEUED
[Fri Jul 10 11:51:52 2026] ata3.00: cmd 61/d8:08:f0:d8:d5/00:00:1d:00:00/40 tag 1 ncq dma 110592 out
[Fri Jul 10 11:51:52 2026] ata3.00: status: { DRDY }
[Fri Jul 10 11:51:52 2026] ata3.00: failed command: WRITE FPDMA QUEUED
[Fri Jul 10 11:51:52 2026] ata3.00: cmd 61/08:10:f0:6d:94/00:00:0f:00:00/40 tag 2 ncq dma 4096 out
[Fri Jul 10 11:51:52 2026] ata3.00: status: { DRDY }
[Fri Jul 10 11:51:52 2026] ata3.00: failed command: READ FPDMA QUEUED
[Fri Jul 10 11:51:52 2026] ata3.00: cmd 60/00:58:58:96:d8/01:00:01:00:00/40 tag 11 ncq dma 131072 in
[Fri Jul 10 11:51:52 2026] ata3.00: status: { DRDY }
[Fri Jul 10 11:51:52 2026] ata3.00: failed command: READ FPDMA QUEUED
[Fri Jul 10 11:51:52 2026] ata3.00: cmd 60/08:c0:28:2f:d7/00:00:12:00:00/40 tag 24 ncq dma 4096 in
[Fri Jul 10 11:51:52 2026] ata3.00: status: { DRDY }
[Fri Jul 10 11:51:52 2026] ata3.00: failed command: WRITE FPDMA QUEUED
[Fri Jul 10 11:51:52 2026] ata3.00: cmd 61/20:c8:e8:90:94/00:00:31:00:00/40 tag 25 ncq dma 16384 out
[Fri Jul 10 11:51:52 2026] ata3.00: status: { DRDY }
[Fri Jul 10 11:51:52 2026] ata3.00: failed command: WRITE FPDMA QUEUED
[Fri Jul 10 11:51:52 2026] ata3.00: cmd 61/08:d0:a0:94:94/00:00:31:00:00/40 tag 26 ncq dma 4096 out
[Fri Jul 10 11:51:52 2026] ata3.00: status: { DRDY }
[Fri Jul 10 11:51:52 2026] ata3.00: failed command: WRITE FPDMA QUEUED
[Fri Jul 10 11:51:52 2026] ata3.00: cmd 61/08:d8:e0:5d:97/00:00:31:00:00/40 tag 27 ncq dma 4096 out
[Fri Jul 10 11:51:52 2026] ata3.00: status: { DRDY }
[Fri Jul 10 11:51:52 2026] ata3.00: failed command: WRITE FPDMA QUEUED
[Fri Jul 10 11:51:52 2026] ata3.00: cmd 61/20:e0:50:5e:97/00:00:31:00:00/40 tag 28 ncq dma 16384 out
[Fri Jul 10 11:51:52 2026] ata3.00: status: { DRDY }
[Fri Jul 10 11:51:52 2026] ata3.00: failed command: WRITE FPDMA QUEUED
[Fri Jul 10 11:51:52 2026] ata3.00: cmd 61/08:e8:38:a9:94/00:00:0f:00:00/40 tag 29 ncq dma 4096 out
[Fri Jul 10 11:51:52 2026] ata3.00: status: { DRDY }
[Fri Jul 10 11:51:52 2026] ata3.00: failed command: WRITE FPDMA QUEUED
[Fri Jul 10 11:51:52 2026] ata3.00: cmd 61/80:f0:28:75:7c/00:00:01:00:00/40 tag 30 ncq dma 65536 out
[Fri Jul 10 11:51:52 2026] ata3.00: status: { DRDY }
[Fri Jul 10 11:51:52 2026] ata3: hard resetting link
[Fri Jul 10 11:51:52 2026] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[Fri Jul 10 11:51:52 2026] ata3.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
[Fri Jul 10 11:51:52 2026] ata3.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
[Fri Jul 10 11:51:52 2026] ata3.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
[Fri Jul 10 11:51:52 2026] ata3.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
[Fri Jul 10 11:51:52 2026] ata3.00: configured for UDMA/133
[Fri Jul 10 11:51:52 2026] sd 2:0:0:0: [sda] tag#11 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK cmd_age=35s
[Fri Jul 10 11:51:52 2026] I/O error, dev sda, sector 30971480 op 0x0:(READ) flags 0x80700 phys_seg 16 prio class 2
[Fri Jul 10 11:51:52 2026] sd 2:0:0:0: [sda] tag#24 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK cmd_age=34s
[Fri Jul 10 11:51:52 2026] I/O error, dev sda, sector 316092200 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[Fri Jul 10 11:51:52 2026] ata3: EH complete
test@test-B75:~$
